Denne identifikatoren kan du bruke til å sitere eller lenke til denne innførselen:
http://hdl.handle.net/2282/301
|
| Tittel: | An experimental and computational study of flow behaviour in bubbling fluidized beds |
| Forfattere: | Halvorsen, Britt |
| Dato: | 2005 |
| Sammendrag: | Experimental and computational studies of bubble behaviour in gas/solid fluidized beds have
been performed. Bubble behaviour depends on particle density, particle size and size
distribution and emphasis is given to study these effects. Bubble behaviour is also influenced
by the superficial gas velocity, excess gas velocity and the relation between particle diameter
and bed dimensions. These effects and their influence on flow behaviour are studied as well.
Measurements have been performed on a two-dimensional fluidized bed with a central jet.
Experiments were performed with two different groups of powders A video camera was used
to detect bubble behaviour. The purpose was to verify the calculation of bubble formations on
a simple well-defined model.
A three dimensional fluidized bed has been constructed and built. A fibre optical probe was
used to detect bubbles and their properties. A Labview program has been developed to
calculate bubble frequencies, velocities and sizes from the detected signals. Powders with
different particle size distributions were used to study its influence on flow behaviour. It was
found that bubble behaviour is highly dependent on particle size distribution and that this has
to be taken into consideration in the modelling of gas/particle systems.
A three-dimensional computational fluid dynamic (CFD) model developed by previous
studies at Telemark University College was modified to improve its use in dense particle
systems like bubbling fluidized beds. A computational routine was developed to calculate
bubble frequencies, velocities and sizes. To obtain realistic bubble shapes and bubble
velocities, second order upwind schemes and different flux limiters were included in the code.
The code has been modified to prevent unphysically dense packing of solids. A ‘switch’ to
plastic regime at critical packing has been included in the code. Frictional stresses substitute
the kinetic and collisional stresses above a specified critical packing. The solid pressure is
defined as a function of the solid volume fraction. A routine for solid volume fraction
correction was included in the code to stabilize the computations in closed packed regions. An
alternative equation for the radial distribution function has been included.
Simulations of bubble behaviour in two and three dimensional beds have been performed with
different types of powders and different superficial gas velocities. The influence of drag
models, coefficient of restitution and number of particle phases has been studied. The
numerical results correlate fairly well with experimental data for most of the cases.
A computational study of bubble behaviour in fluidized beds with different diameters has
been performed by using a CFD code developed at National Energy Technology Laboratory
(NETL). The computational results are compared to experimental data presented in literature.
Some connections between bubble behaviour and bed dimensions were observed and can be
used for further work on the scaling of industrial fluidized beds. Scaling was also performed
by using scaling parameters. |
| Nøkkelord: | Bubble behaviour
Fluid dynamics
Modelling |
| Forlag: | Høgskolen i Telemark |
| Dokumenttype: | PhD thesis |
| URI: | http://hdl.handle.net/2282/301 |
| ISBN: | 82-471-7012-4
82-471-7011-6 |
| Vises i samlingene: | Doktorgradsavhandlinger i prosess- energi og automatiseringsteknikk
Institutt for prosess-, energi- og miljøteknologi
|
Denne innførselen er lisensiert under en brukslisens. Alle innførsler i TEORA er beskyttet av opphavsrett.
|
