|
Denne identifikatoren kan du bruke til å sitere eller lenke til denne innførselen:
http://hdl.handle.net/2282/288
|
| Tittel: | Assessment of mercury emission at Norcem's cement kiln by use of 203 Hg tracer |
| Forfattere: | Eriksen, Dag Øistein
Tokheim, Lars-André
Eriksen, T.A.
Meyer, Julien
Qvenild, Carsten |
| Dato: | 2005 |
| Sammendrag: | In manufacture of cement clinker, mercury (Hg) is introduced in the cement kiln system via the fuels
and as constituents in the raw materials, i.e. limestone, iron ore, etc. The permissible emission of Hg to air is very
low (0.05 mg/Nm3) due to its toxicity. Thus it is important to know how mercury distributes and behaves in the
kiln system. The objective of the study was to measure the distribution of mercury in the kiln system, to measure
the hold up time of Hg, to measure the portion of emission through the chimneys, and to see the dependence of the
injection sites on these parameters.
The results showed that the amounts of mercury being emitted through the exhaust gases were largely dependent
on where it was injected. The residence time of mercury in the system was nevertheless long, after 10 hours it was
still increase in the count rate of the mercury absorbed. There was also an immediate increase in the filter dust, but
nothing could be measured in the clinker. This is knowledge needed for reduction of mercury emissions. |
| Nøkkelord: | Cement kilns
Emissions
Cement clinkers
Mercury |
| Dokumenttype: | Conference paper |
| URI: | http://hdl.handle.net/2282/288 |
| Vises i samlingene: | Institutt for prosess-, energi- og miljøteknologi
|
Denne innførselen er lisensiert under en brukslisens. Alle innførsler i TEORA er beskyttet av opphavsrett.
|
|
